TIP Drill bit

TIP: Make sure that the chuck of your drill closes down to zero or it may not hold these very small bits. If it does not, a good hardware store or mill supply can get you such a chuck and show you how to install it in your drill.

TIP: Before drilling small pinning holes in fabric-covered decks or wall panels, mark the locations first on low-tack masking tape laid on the fabric. Otherwise you might lose sight of your tiny drilled holes in the weave of the fabric.

Quantity must be between 5 and 14

Quantity must be between 15 and 29

Quantity must be 30 or over

Minimum Quantity Must be 5

There must be at least one Oversized Shipping Charge in our cart with Case Dressing Fabrics.